Articles Comments

AMSOIL Dealer alaska » AMSOIL Synthetic Multi-Purpose Grease NLGI #1

AMSOIL Synthetic Multi-Purpose Grease NLGI #1

AMSOIL Synthetic Multi-Purpose Grease NLGI #1 are qualified against the highest grease standards and are designed for multiple use applications

AMSOIL Synthetic Multi-Purpose Grease

AMSOIL Synthetic Multi-Purpose Grease, NLGI #1 (GLB) provide superior film strength, shear resistance, adhesion properties and mechanical stability, and they excel in temperature extremes by providing excellent oxidation stability, high temperature dropping points and low temperature torque values and pumping capabilities.

 

While Supplies Last, Package Sizes Include:

14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
400-lb. Drum

PRODUCT DESCRIPTION
AMSOIL Synthetic Multi-Purpose Greases NLGI #1 are qualified against the highest grease standards and are designed for multiple use applications. Composed of premium quality synthetic base oils and lithium complex thickeners, Multi-Purpose Greases provide superior film strength, shear resistance, adhesion properties and mechanical stability, and they excel in temperature extremes by providing excellent oxidation stability, high temperature dropping points and low temperature torque values and pumping capabilities. AMSOIL Synthetic Multi-Purpose Greases are formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL Synthetic Multi-Purpose Greases NLGI #1 PERFORMANCE FEATURES

  • High dropping point of 500°F+
  • Resists thermal and oxidation degradation
  • Excellent water-washout resistance
  • Good low temperature pumpability and torque values
  • Adhesive and shear stable to prevent squeeze out

Applications or Requirements

  • GLB (#1) ASTM D-4950 (NLGI) Service GC/LB
  • GLB (#1) Cincinnati Milicron P-72 Spec

AMSOIL Synthetic Multi-Purpose Greases NLGI #1 APPLICATION RECOMMENDATION
AMSOIL Synthetic Multi-Purpose Greases NLGI #1 is recommended in manual or automatic lubricating systems. NLGI #1 (GLB) has better mobility and is the preferred choice for colder applications, automatic lubrication systems with long pumping runs and gear box applications (where recommended by manufacturer).

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Greases NLGI #1 is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases NLGI #1 are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases NLGI #1 are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Typical Technical Properties
AMSOIL Synthetic Multi-Purpose Greases NLGI #1 GLB NLGI GC/LB
Thickener lithium complex NR
NLGI consistency grade 1 NR
NLGI performance grade GC-LB NR
Penetration – ASTM D 217 (25°C [77°F], 0.1 mm) worked 60 strokes 310-340 220-340 min
Dropping point, °F[°C] – ASTM D2265 500 [260] 428 [220] min
High temperature life, hours – ASTM D 3527 140 80 min
Oxidation stability, psi – ASTM D 942 (100 hr/300 hr) 0/5 NR
Water washout, percent – ASTM D 1264 5.8 15 max
Rust and corrosion – ASTM D 1743 pass pass
Oil separation, percent loss – ASTM D 1742 (24 hours, 25°C [77°F] 3.4 6.0 max
Leakage, g lost – ASTM D 4290 7.8 10 max
Four ball wear test, mm scar – ASTM D 2266 0.43 0.60 max
Fretting wear, mg – ASTM D 4170 3.5 10 max
Four ball EP, kgf – ASTM D 2596Weld pointLoad wear index 31549 200 min30 min
Timken OK load test, lbs – ASTM D 2509 45 NR
Low temperature torque, N*m – ASTM D 4693 (-40°C [-40°F]) 0.50 15.5 max
LT-37 pumpability, g/min (60°F/0°F [16°C/-18°C]) 855/29 NR
Copper corrosion – ASTM D 4048 1B NR
Disc brake wheel bearing specificationsFord ESA-M1C 198AChrysler MS-3701 NANA NRNR
Oil viscosity:40°C [104°F], cSt100°C [212°F], cSt 15119.2 NRNR
Flash point, °F[°C] – ASTM 92 450[232] NR
Color red NR
Texture smooth with tack NR
NA: Not applicableNR: Not required for NLGI GC-LB labeling

AMSOIL Synthetic Multi-Purpose Grease, NLGI #1

Leave a Reply

*

*